Windows & façades
Window seals, glazing profiles and façade seals – high volumes, permanently weather-resistant, often supplied as closed frames.
Typical materials
- EPDM
- EPDM sponge
- Silicone
The product
In window and façade construction, EPDM and silicone profiles seal sashes, glazing and curtain wall systems. They are produced in long lengths on continuous lines; many are then joined into frames.
Typical products
- Rebate and centre seals for windows
- Glazing gaskets
- Curtain wall and façade seals
- Door seals for buildings
- Sealing frames as endless seals
What matters
- 01
Weather-resistant
UV, ozone and temperature cycles for decades – the domain of EPDM and silicone.
- 02
High output
Long continuous lines for large profile volumes at constant quality.
- 03
Closed frames
Low-seam joints where the seal is installed as a frame.
The line
These TSM systems are typically used – in production order:
- 01
ExtrudersExtrusion, also multi-layer co-extrusion. - 02
Microwave SystemsFast through-heating of EPDM profiles from the inside. - 03
Hot Air SystemsLong hot air sections up to 21 m for high line speeds. - 04
Cooling LinesCooling trough with air drying. - 05
Splicing PressesJoins profiles into low-seam sealing frames. - 06
Exhaust Air CleaningCT 1000 catalytic exhaust air cleaning.
The design always depends on your compound, profile and output – talk to us, including about a trial in our pilot plant.
Related applications
We are here for you!
Send us your profile drawing, compound and required output for “Windows & façades” – we will propose the right line.